• Home
  • E-submission
  • Sitemap
  • Contact us
J. Conserv. Sci Search

CLOSE


Journal of Conservation Science 2007;20(0):67-80.
Published online March 20, 2007.
이천 설봉산성 출토 철제 낫의 제작기술 연구
유재은
Ancient iron technologies as observed in the microstructures of iron sickles excavated from Icheon Seolbong fortress
Jae-eun Yu
초 록
이천 설봉산성은 경기도 이천시 사음동에 소재하는 석성으로 단국대학교 박물관에 의한 발굴조사 결과 4세기 후반의 백제시대로 편년되었다. 출토 유물은 토기, 기와, 자기, 금속유물 등 다양한 종류를 나타내며 특히 백제 토기가 출토된 토광에서 철제유물이 다량으로 수습됨으로써 철기가 백제시대에 제작되었음을 알 수 있다. 이중 철제 낫 6점(벌낫 2점, 밀낫 4점)을 대상으로 시편을 채취하여 미세조직을 분석하고 이를 근거로 유물 제작에 사용된 철 소재, 성형, 제강법, 열처리 등을 살펴보았다. 이를 통해 산성이 속한 4세기 후반 백제의 철기 제작공정 체계를 설정하였다. 그 결과 낫의 용도에 따라 부위별로 다른 처리를 한 것을 알 수 있었다. 벌낫은 날 부위에 담금질을 하여 강도를 요구하는 특별한 용도로 사용되었고 밀낫은 특별한 처리를 실시하지 않아 벼나 풀을 베는데 사용되었던 것으로 추정된다. 사용 소재는 강으로 미리 어떤 제강법으로 강을 만들고 이를 성형하여 철기를 제작하였고 특별한 강도가 요구되는 부위는 열처리를 실시하여 단단하게 하였다. 이상의 결과로 당시 백제 철기의 제작공정은 제강성형열처리 과정이 적용된 것을 알 수 있다.
중심어: 미세조직, 담금질, 열처리, 퍼얼라이트, 페라이트, 마르텐사이트, 제강
ABSTRACT
Icheon Seolbong fortress is located in Saum-dong, Icheon, Gyeonggi-do Province that its date is founded as 4th century of Bakjae dynasty after excavation by Dankook university museum. Excavated artifacts show various kinds such as earthenwares, ceramics, metal artifacts and so on. Especially many iron artifacts were founded in where Bakjae earthenwares were found that it indicates iron artifacts were manufactured in Bakjae Dynasty. From 6 iron sickles, called Beollat and Millet, samples were taken to examine mircostructures and from the results used iron material, shape-forging, steel-making process, heat treatment were investigated. From this late 4th century Bakjae dynasty iron manufacture profess was established. From the result, different treatment were used in different area of the sickles according to the its use. Beollats were quenched in blade and it was used for special purpose that require Intensity. Millats did not have special treatment that it was used to cut rice plant and plant. Used material was steel, steel was previously made by certain steel-making process. It is formed to produce iron ware and the area where intensity is required heat treatment was employed to make it strong. From the investigation it is derived that iron ware manufacture process in Bakjae dynasty is steel makingshape-forgingand heat treatment.
Key Words: microstructure, quench, heart treatment, pearlite, ferrite, martensite, steel-making


ABOUT
BROWSE ARTICLES
EDITORIAL POLICY
FOR CONTRIBUTORS
FOR READERS
Editorial Office
303, Osongsaengmyeong 5-ro, Osong-eup, Heungdeok-gu, Cheongju-si, Chungcheongbuk-do, Korea
Tel: +82-10-5738-9111        E-mail: journal@conservation.or.kr                

Copyright © 2024 by The Korean Society of Conservation Science for Cultural Heritage.

Developed in M2PI

Close layer
prev next